help!,i have a new manual dieasal lift pump,the type you prime with your thumb,it's held by two bolts,i know how to connect up the fuel lines,but the pump?,can i just unbolt,remove and slide new pump in place,is it that easy????,help!,just want to start engine again,thanks

jason, August 2010

Just Bolt it on then prime the engine bleed valve on top of twin filters then on the injection pump (very small 8mm bolt be carefull not to over tighten....Might have to slacken one of the injector pipes to get it going..... paul horseboxrepair.com

horseboxrepair.com, September 2010