My Rover 25 won't go into gear have replaced clutch and clutch cable but still won't work don't know what else to do

glass18963, February 2013

Thank you I will get them to check the points you have brought up great full for any suggestions

glass18963, February 2013

if it goes into gear with engine off then you have a clutch problem.Did you replace all three parts of clutch?Is the cable adjusted properly?Have seen clutch release levers where the cable attaches to have stress fractures also.I do not want to doubt yourself also but was the centre plate put in the correct way round and it is not unusual to have a faulty new clutch assy.Have seen the bulkhead where the cable goes through to the pedal have stress fractures also affecting clutch clearance,just some things to check,good luck

cdc, February 2013