Hi,
I have a 1994 Peugeot 306 with a Blankpunkt PF3 radio, thing is that I want to put a CD player in instead, but I don't know how to remove this radio... Anyone able to help?
Kenwood Radio Release Keys are the perfect solution. They are the exact size without marking the dash. http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&rd=1&item=390034724179&ssPageName=STRK:MESE:IT
wirehazard, March 2009
don't use a hacksaw blade. this fella is obviously a retard and wants you to mark your dash!
small flat blade screwdriver shud fine
hotdigidida, September 2008
I saw red this morning as the local Peugot agent wanted to charge me £30 plus for the radio code. As a potential new customer they lost the business of servicing my 306T. I was then determined to resolve the problem without them. So I attempted the removal of the unit to get at the Serial No. I found the hacksaw blades not stiff enough but used two guarter inch wide flat bladed screwdrivers that were strong enough to lift the two spring steel clips that are attached to the frame. These in themselves are just over half an inch wide. It worked so now to try and get the code.
.
Ian Reed, November 2007
take 2 flat head screw drivers if you gently stick each driver in at the bottom part of your radio, their is 2 small levers you need to releasr them both with your screwdrivers and it should then pull out .hope this helps
michelle shuttleworth, September 2007
USE A FLAT EDGE BLADE IE HACK SAW BLADE UNDER THE UNIT TO RELEASE THE OLD UNIT WORKS EVERY TIME I HAVE DONE IT TWICE!
