Hotpoint Aquarius - door won't open?

After replacing the brushes on my Hotpoint Aquarius 800 WM13 I can no longer get the door to open. When the door release button is depressed there seems to be a lack of resistance. Any advice?

done

My Hotpoint 9934 will not open?

I have a Hotpoint Washer/Dryer 1000 de luxe 9934.At the end of the cycle I cannot open the door.I have tried every cycle with the same result.How do I get my washing out.

done

my hotpoint ts12 tumble dryer is not tumbling, how do i fix it?

the dryer makes all the right sounds when switched on but the drum does not turn, what can i do

done

thermostat on hotpoint aquarius?

I have just replaced the two thermostats but suspect the new (red dot )one is faulty. Having checked it with a multimeter it is in the normally open postion. when shorted with a piece of wire, the el ... more

done

what does error ,e, mean on the hotpoint ff93 firdge freezer?

the fridge is not cooling to the setpoint of 2 degrees, the frezzer however is working fine and maintaining minus eighteen degrees. the circulating fan for the fridge that is operated off the door swi ... more

done

Please Help! Hotpoint won't spin?

Hi I replaced the drum bearing on my Hotpoint and it works fine, except it won't spin anymore! Any Idea's??? Thanks

done

VIBRATION HOTPOINT WM22 WASHING MACHINE?

I have recently fitted new bearing to my Hotpoint WM22 Washing machine as well as new dampers. I have replaced everything as before but am now experiencing excessive vibrations which actually move th ... more

done

Hotpoint Aquarius 1000 Deluxe takes water constantly?

Hi, My washer is always pumping water into the drum, even when no wash cycle is selected - left the house and came back to flooded kitchen. Not good. Any simple solution??? Thanks, Mark

done

How can I fix my Hotpoint 9901 Washer/Dryer?

My Hotpoint 9901 Washer/Dryer won't heat up it tumbles clothes but no heat at all. Washer works ok on seperate cycle

done

why does my hotpoint ultima wf860p washer keep doing a full test?

the washer when switched on goes automatically onto test on the screen then runs full fault diagnostics

done

Hotpoint aquarius tdc30 No power at all?

my tumble dryer as stopped working . went to turn it on and nothing happens at all. changed the fuse in the plug and checked the wires on all conections and they are all conected ok

done

hotpoint wma 30?

how do i replace drum bearings

done

Stuck in Demo - Dwf70?

My dishwasher (Hotpoint dwf70), no matter what program I use comes up demo, How do I get it out of the demo mode, I've looked in the manual, it does not even mention it.

done

how to fix hotpoint wmt05?

my machine is making a noise when on a slow or fast spin like something is stuck in the drum. Tried spin when empty and no noise but when loaded loud rattling is back on both fast and slow spin. pleas ... more

done

Hotpoint Aquarius WM63. Replacing the door?

Just before Christmas the door broke off our WM and a new metal hinge was ordered from Hotpoint. I now have the new hinge fitted to the door and the whole assembly needs attaching to the machine. ... more

done

i need to fix hotpoint ultima?

why wont my ultima except fabric softner after the clothes our washed ,after they are washed the fabric softner remains in the loading drawer why isnt it getting washed into the clothes ULTIMA 140 ... more

done

hotpoint 7 cycle heavy duty washer help?

when the water goes in threw the intake box it then leads to a plastic catch with no back then there is a hose from the catch to the tub. the problem is at the plastic catch it is now squirting the ... more

done

Hotpoint Ultima Shower?

There is wwater going to the shower, but when you switch it on it comes up with the light saying 'low flow' and no hot water....

done

diagram for tdc30p?

I need a diagram for hotpoint tdc30p. So i no which parts to remove . As it is not drying clothes. It is blowing out cold air heip !!!

done

hotpoint WMA30 belt falls off?

Can you help me, my hotpoint WMA30 belt keeps coming off . do I need a new belt or is something missing. Also where can I find the drain filter

done