Singer sewing machine presser foot lifter model 3116?

The presser foot lifter is not working on the model 3116 Singer Simple sewing machine. The serial is ZHC827302274.


How can I mend my Frister & Rossmann sewing machine?

My Frister & Rossmann cub sewing machine has worked well for years. It has now suddenly gone berserk working at high speed even without depressing pedal. Can you help?


done

Frister & Rossmann cub 7?

how do I get a zig zag stitch on my Frister & Rossmann cub 7?


done

How can I fix Frister Rossmann Electronic Cub 8?

Frister & Rossmann Electronic Cub 8. The repair guy said the electronic card had died, what can I do?


How to buttonhole?

Lervia KH40001 sewing machine....how do I get the stitch selector to turn from Q onto R, S, T which are in red on the dial. The dial will not turn either way past the yellow Q one way, or the A the op ... more


Stitch selector on Lervia KH400?

Lervia KH4000 sewing machine. Please can you explain how to get the stitch selector dial to turn to R, S and T ( which are all in red on the dial) it turns easily until Q, but then will not turn any ... more


Mend my Frister & Rossmann sewing machine cub 4?

HI I recently oiled my Frister & Rossmann sewing machine cub 4. I've never oiled it before! Today I sewed with it for 30 minutes and it suddenly went very slow. I'm worried I put oil on the wrong part ... more


The thread loops under the fa?

The top thread on my Frister and Rossmann Fantasy 972 loops no matter what I do. Adjusted the top and bottom threads makes no difference. I noticed the top thread catches between the bobbin case and a ... more


done

Toyota SL3404D Overlocker leaving big loops?

My Toyota SL3404D Overlocker is leaving loose loops, how can I fix this.


done

Jones 461 sews in reverse?

My Jones 461 machine has been unused for over 20 years. It now will only see in reverse and I am unable to adjust the pattern selection as nothing seems to connect when the pattern selection push but ... more


How to reassemble Cub 4 sewing machine clutch handwheel?

I have a Frister and Rossman Cub 4 sewing machine. I, unfortunately, took the handwheel apart, and the springs and bearings popped out. What is the best way to reassemble the clutch system for this pu ... more


285k singer sewing machine?

I have singer machin 285k it's working. But when I use my singer moter is go to hot


Singer Sewing Machine 427 Thread take up lever?

Singer Sewing Machine 427. I need to put in a new Thread Take Up lever as the previous one broke after a fall. I have a second machine I bought for spares which I am trying to take apart for the lev ... more