home Fix label Household Appliances label_important Washing Machines category Indesit

How do I fix my Indesit WIE 167 problem?

My Indesit WIE 167 washing machine is giving me a F-03 code.
It starts to fill with water then empties it all out.

Christopher, December 2007

home Fix label Household Appliances label_important Washing Machines category Indesitdone

my washer will not fill or start, it displays 'DOOR'. Ihave replaced the door interlock and handle?

mandy, June 2013

F03 is a Temperature sensor fault. The sensor is located in the heater. There is a small black plug with two wires. Check for corrosion on the pins.
The thermistor (temp sensor) should also be checked for its resistance reading.

Eric, December 2007

link Click here to see other fixes for Indesit.

Fix Fault - Household Appliances

home label Household Appliances label_important Washing Machines

Fix Fault - Household Appliances

home label Household Appliances label_important Washing Machines

fixfault.com for free repair help, information and advice.

How can I fix my Bosch Classixx 1200 Express?

How can I fix my Miele W800?

How can I fix my Hotpoint WMA74?

How can I fix my Hotpoint WMA33P?

How can I fix my Miele W863?

home Fix label Household Appliances label_important Washing Machines category Indesit

How do I fix my Indesit WIE 167 problem?

I can answer this question...

How do I fix my Indesit WIE 167 problem?

I can answer this question ...

How do I fix my Indesit WIE 167 problem?

Hoover front loader?

Indesit Fault F05?

Twin Tub leaking?

Diagnostic Codes for Tricity bendix aw1202w washing machine?

How do you remove the control panel of a Simpson Enduro 751?

Leaking washing machine?

Beko wm74145?

How to fit new seal on hoover washer/dryer?