How do I put a new drive belt on a craftsman tractor? John?

I have a craftsman tractor model number 502.254970. I can't figure out how to install a new drive belt. The other one broke. Can anyone help me?

done

After replacing my starter cord, starter rope is hard to pull ?

The starter rope is hard to pull and engine will not start. This is a craftsman model 917.377264. It appears that the engine flywheel brake is on . When I depress the control bar to the upper handle ... more

done

Why does my Craftsman 12 HP tractor stall when the mower is engaged?

When I engage the mower on my Craftsman 12 hp riding tractor, the engine stalls. Otherwise the tractor runs fine. The tractor is about 10 years old.

done

mower stops running after starting?

Craftsman II 3 One Convertible mower model 917 373680 starts when primed but quits after a few seconds. Starts again when primed again, but will not continue running.

done

how to stop the drive belt from comming off the pulley?

I have a sears craftsman lawn tractor with kohler 16.5hp pro. it has a manual 6spd and the drive belt comes off often. the belt was just replaced and things are still not right. The belt has come of ... more

done

How do I remove the mower deck mandrell on a Craftsman riding mower?

How do I remove the mower deck mandrell on a Craftsman riding mower.

done

what causes gas to mix with the oil on a 15 hp craftsman riding lawn mower?

why does gas mix wiyh the oil on a 15.5hp kohler engine on a craftsman lawn mower

done

I have a Craftsman Mower, and the rope will not withdraw?

The rope won't withdraw, thus I can't start it. The mower is a Craftsman. It is also a self propel version. Can anyone help?

done

Craftsman lawn tractor is hard to get in gear?

I have a 3 year old craftsman 1100 lawn tractor. 42 inch cut, 14.5 hp. I notice at the end of last summer that when I move the lever to put it in gear that it was getting hard to move the handle. This ... more

done

Replacing drive belt on Sears Craftsman II?

The drive belt (v-belt, part # 131006) broke. The model # for the mower is 917.254860. This is the upper belt. I have purchased the replacement belt, but I cannot put my hands on the manual that ca ... more

done

My automatic throttle no longer works?

I have a sears craftsman lawnmower and I am having a problem with the automatic throttle. I took the carberator apart because it had set in the rain for about a year. I got it back all together and ... more

done

Where to posistion new blades on Craftsman 3 blade mover?

My mower leaves an uncut patch of grass about 6 inches wide about in the middle of the cut path. I have replaced all three blades and it did not help. Do the blades need to be installed in a set patt ... more

done

Leveling the mower deck on a Craftsman?

Any suggestions on how to level the mower deck on a Craftsman 42 inch cut lawn tractor to stop uneven cut? I changed blades and now it cuts a deep grove on one side.

done

How can I get my lawn mower started?

My father' s Sears Craftsman 5.0 HP, 4-cycle, self propelled mulching mower sat for seven years after he died. It ran fine then. I retrieved the mower, changed the plug, replaced oil, new gas, took a ... more

done

lawn tractor will not move?

Our sears lawn tractor mower Craftsman 310707 type 0137-51 will not move forward or backward. Starts fine. When I put it in gear it does nothing. Doesn't make any sound when I put it in gear. Coul ... more

done

battery?

i have a craftsman 10 hp rider it runs good but you have to jump start it every time i tried a new battery and it drained it what could be the problem

done

How to remove engine pulley?

I have a Craftsman rider with a blown 12.5 Techumseh. How do you remove the engine pulley from the shaft for installation on new engine.

done

Need replacements screws for Craftsman gas hedge trimmers?

Missing 3 of 4 screws that hold blade to motor of trimmer. Can't find anything on Sears website or at local lawn equipment repair shop

done

Craftsman gas mower. 3 yrs old?

The pull cord came out when I went to start the mower. How do I put it back in. Do I have to take the mower apart or can it be inserted from the outside. Crasftsman 6.5 horsepower ,21" multi-cu ... more

done

REPLACE BELT ON RIDING MOWER?

WHAT IS THE EASIEST WAY TO REPLACE THE BELT ON MY CRAFTSMAN RIDING LAWN MOWER . . . . I CANNOT FIND MY OWNERS MANUAL

done