Where's the Thermostat?

I have a Creda T622CW which is not heating up. I have replaced the heating element and the 2 thermostats at the back. I contacted a local dealer who informed me that there is another thermostat at t ... more

done

Creda T632CW - Brand New today. Worked ten mins then stopped?

Help, I have just bought a T632CW Condeser sensor dryer and it worked for ten mins and I opened the door to check the clothes and when I closed it and pressed start nothing happened. the green light ... more

done

Creda 37747 has no heat?

My creda tumble dryer spins but there is no heat. I have changed the thermostats as the had just gone. I have checked them and they are ok(not open circuit). There seems to be no power getting to the ... more

done

thermal cut out switches creda 37747?

I am wanting to replace the thermal cut out pair of switches does anyone have a coloured diagram of how to fix them on i stupidly didnt take a note of the colours when i removed them. One has a red do ... more

done

How can I fix my creda T620CW tumble dryer?

I have no heat coming through on my creda T620CW condensor dryer. I have changed all of the thermostats, inspected the wiring and elements with no obvious faults found.

done

What's wrong with my Creda T630CW Condenser Tumble Dryer?

My Creda tumble dryer keeps cutting out. If I wait for a minute, it will run again if I push the start button. However, a couple of minutes later it cuts out again. I have ensured the water tray is ... more

done

Creda T622CW - water indicator light will not go out?

The water indicator light on my tumble dryer will not go out. I have emptyed the water, and cleaned the filter and condensor but as soon as I switch the dryer on, the light goes on. With this the drye ... more

done

need help to fix Creda Condenser Tumble dryer?

I have a Creda Condenser Tumble dryer Model # 37662 , the problem is that the excess water is not being collected in the condenser removal tray,the clothes are warm in the dryer.Can someone point me ... more

done

how can i fix my creda washing machine door?

recently fitted new brushes after first wash door is stuck and wont open even when switched off can you help please

done

Creda Tumble dryer fixing the belt back on?

I am trying to fix the tumble dryer, basically the belt has snapped, so having undone the back of the dryer, and purchasing a new belt i have managed to get the belt onto the pully system and round th ... more

done

Creda Problem?

I have a creda 37378 tumble dryer the motor runs, the element is fine but the drum does not turn how do i acess that area of the machine and is it the belt that is at fault?

done

Creda 37468 tumble drier?

Thanks Peter C. But how does the belt fit round the pulleys. Assuming this is the same as your Creda model

done

Creda 37468 tumble drier belt replacement?

How do I change the belt on a Creda 37468 tumble drier

done

My Creda condesair advance?

What's wrong with my tumble dryer it is going around ok. It just does not blow out warm air. So the clothes want dry

done

How can I replace the capacitor on my creda condensor dryer?

I used the tip from E.Lambert ( many thanks) and the motor does kick in. How do I now access the capacitor and replace it?Is htere access to the motor via the base of the machine?

done

How can I replace the motor in A Creda condenser t620cw?

The heating comes on but the drum does not rotate. If I manually rotate the drum the fan rotates, if I manually rotate the fan the drum rotates so I think the belt is ok. Can't see how to get to the m ... more

done

replace the drum bearings on my Creda 37747 condensair?

Can you please help our Tumble drier is making a dreadfull noise which I believe to be the drum bearings which I would like to replace myself

done

How to fix Creda condenser t620cw?

I've tried the t.o.c s, the relay, heater. I'm not getting a live to the heater, I have a nuetral but no live. I'm thinking it must be the programmer, has anyone had this fault.

done

Heater element or somthing like that has failed?

I have a Creda Reversair tumble dryer It has a heat select rocker switch of high or low. It was brand new about 18 months ago. It would appear that we're not getting any low or high heat. I've managed ... more

done

how do I fit a drive belt on a Creda reversair 37468 tumble drier?

Does anyone know how the drive belt on this drier fits round the pulleys? I have got the belt in position, but when I fit it onto the pulleys in the only obvious way, the drum does not rotate, and I ... more

done