My Zanussi WDJ1500 won't heat up?

I have tested the Neutral return from the element to the main board, and from the board to the Neutral input all ok. Something on the board is causing open circuit. Is the board at fault, or is the co ... more

done

zanussi tc482w?

why does my dryer switch off and the orange light come on (to say reservoir is full) even though i check the reservoir and it only has a bit of water in it, also, is the metal canister (the condenser? ... more

done

Anyone know how to change the bearings on a Zanussi FJ1093, please?

Anyone know how to change the bearings on a Zanussi FJ1093, please?

done

zanussi 916770505 ( 524AL) drum vibrating?

hi, hope you can help. The above tumble dryer started leaving black marks on the clothes and was making a grinding noise when running. When i take off the top cover and move the drum it lifts consi ... more

done

How can i reset mY Zanussi DE4744 Dishwasher?

My Zanussi Dishwasher DE4744 programmer has suddenly stopped working. It seems to be stuck on Intensive 80 deg button. And whatever i do i can't get it to reset. Anyone got any ideas cause the dishes ... more

done

Zanussi Jetsystem 1400- LED Code 3 ?

Each time the machine is switched on to wash, the LED dispays code 3 and attempts to drain the machine. Any suggestions to correct this problem ?

done

Zanussi washer drier Model WDT.1075?

I need to replace the drum bearings on a Zanussi washer drier Model WDT.1075. The outer metal cabinet splits in half and the drum has outer plastic case. Please advise on how to replce drum bearings.

done

I am replacing a belt on a Zanussi Z 300 CD Tumble Dryer?

I am replacing a belt on a Zanussi Z 300 CD Tumble Dryer and I am not sure how to tighten the belt around the motor shaft and pulley - Can you help ? Thanks Pat

done

where are the heater elements located on a Zanussi condenser tumble dryer m?

The tumble dryer is not heating, unable to locate the cutout? or the heater element to check circuits, where are they located

done

Zanussi Turbodry 1200 with E10 code?

My washing machine fails to work in drying mode, it kicks in with an E10 error after about 5 mins of trying. Any idea?

done

Zanussi fl-411c leaks on the floor, what to do with it?

I`ve got a Zanussi FL-411C washing machine. When it starts taking water I can hear the sound of it flushing and after about 20-30 seconds water starts flowing out. Firstly it flows from the drawer in ... more

done

How do I replace drive belt on Zanussi tumble drier TD 525?

How do I replace drive belt on Zanussi Tumble Drier Model TD525?

done

Zanussi TD 530 - How do I replace the belt?

How do I replace the belt on my Zanussi TD 530 tumble dryer - I cannot see a way of getting it round the drum!

done

how do i remove and repair led controll panell zanussi fj1254wrl?

the actual machine works fine when lights in panel do come on but seem to have given up altogether now.I am unable to remove the paneland am curious to know if it can be repaired and how.the on off sw ... more

done

How can i fix my Zanussi wahing machine?

Zanussi Jetsystem 1200 Extra capacity (FJS 1225W) The conditioner compartment on the washer will not empty. I have tried cleaning the holes with a toothbrush, a nail but this is quite hard due to ... more

done

I NEED TO FIT A BELT TO ZANUSSI CONDENSOR TUMBLE DRYER?

THE OLD BELT BROKE AND I HAVE THE NEW ONE BUT I DONT KNOW HOW TO FIT IT WHAT DO I NEED TO OPEN

done

How do I get into my Zanussi 1083 ?

I think the belt may have broken/come off my washing machine. It fills with water ok, and will operate the drain cycle, but as soon as any washing is attempted (ie when the drum is meant to move) it t ... more

done

replacing door seal on zanussi fl1032b?

how can I replace the door seal on my zanussi FL1032B? I've got the old one only partly out, it's still attached to the outside of the machine

done

Zanussi 520 Tumble drier not blowing hot air?

I recently had a repair carried out to my Zanussi 520 Tumble drier as drum was not turning, since then there is no hot air coming into my machine. The person who carried out repair said it was just a ... more

done

new drum belt to slack (Zanussi TC-470)?

bjgrain, I looked at your photo on your yahoo briefcase and my new belt is fitted as per your photo, but still the belt is to slack and the motor spins without moving the drum. Thanks in advance. J ... more

done