Zanussi 1200 jetsystem -Washing machine cycle starts & stopt?

Zanussi 1200 jetsystem - Washing machine cycle starts and stops after less than a minute. It that time water enters the soap tray and then the drum. Drum spins a few times and then (i think) when the ... more

done

Pump keeps running at the start?

Zanussi ZWG 6145 At the start of a program it is normal for the pump to start, but after a while this should stop and the drum should fill up. On my machine, the pump keeps running and nothing else h ... more

Zanussi zwg7160p pcb?

Hi I have just replaced the PCB on my ZWG7160P washing machine (configured board) it came up with a ELE code for a second then nothing, no lights or controls. Do I need to do something manually to ge ... more

done

Zanussi front loading washing machine control switch?

Zanussi FL 811. The machine has an analogue processor controlled by an electric clock. Part of the programme has become unselectable: the clock does not initiate. I can't remove the selector rotor t ... more

Where is the machine leaking?

zanussi electrolux progress 1200 5.5kg leaks water from the bottom (?) even after the wash is finishes. what is likely to e letting water? the input valves are OK

done

Zanussi Aquacycle 1000 FLA 1001W?

Washing machine Zanussi Aquacycle 1000 FLA 1001W Water is not pumping out. I have changed the pump and the filter is clear.

How can i mend washing machine?

Zanussi aquacycle 1100 front load washing machine no longer completes washing cycle and door does not open

Washing machine zanussi?

E20 -code showing on inter grated zanussi washing machine, have checked , filter all clean , still problem , can you help?

Configure Zanussi PCB?

Hi I have a Zanussi WJS-1265-W washer dryer and need to configure the PCB. I saw an excellent answer for a similar machine but it is not quite right for mine. Steps I believe are: 1. switch on with ... more

done

Zanussi FJ 1296 Washing Machine?

drum does not turn in the wash or spin cycle. The water does enter the drum and is pumped out at the end but the drum does not turn. I suspected it might be the belt, but this is fine. Do I need a new ... more

done

Zanussi aquacycle washing machine zwf1221?

When I push the start button the washing button comes on and goes to the end button which just keeps flashing

problem zanussi jetsystem 12oo?

model jet system1200 fjs 1225w sounded like washing a brick /? took top of unit after disconecting placed unit on to door inspect nothing found moter seams ok belt etc ok stood unit back up conecte ... more

Zanussi zdc37200w?

My condenser dryer is not drying clothes completelyafter wasing

zanussi fl 1032/a washing machine top?

how do i remove the top of this wasing machine? have removed the two attachment screws at the rear,but unable to move the top.

water leak from washing powder dispensing drawer ?

Zanussi FL 1032/A WASHING MACHINE Water leaks from washing powder dispensing drawer.I wish to know the cause and how to fix it.

zanussi washing machine, model number: FL 1032/A ?

HI, MY ZANUSSI WASHING MACHINE DON'T START. The electric is on the door shut, button on/of is on at this stage the door should lock and start the sequences, do not happen. The door pilot should go on ... more