after using incorrect shower head, the safety device on outlet pipe blew out. New outlet pipe fitted and original shower head, initially all looked OK. However, quickly seems to have lost pressure, Any ideas?

Roger, November 2007

My shower has lost all pressure got new unit still the same

S Briggs, May 2012

Thanks for the advice. Saved us shedding out on a new unit! PHEW.

Torquay Thankfull, September 2011

many thanks!
good tip

david of ringwood, June 2010

That's brill Thanks worked at treat :-)

Rachel Tighe, January 2010

hi...all you have to do to reset the pressure value on the back of the outlet (water coming out against the wall ?) is push the nylon ball back into place using a small/medium sized allan key. push hard enough and the ball should click back into place. test to see if water stopped from pressure outlet..if not try to push in a little harder. mine is a 10.5 deluxe...done twice over 2 years ..no probs...

walesviking, January 2008