David Dawes asked ... How to recoil the starter spring - Champion R484TR?    |    peter high asked ... How can I set time on my Neff oven?    |    Michael asked ... Mountfield empress drive belt?    |    John Barton asked ... How do i clear the TAM?    |    John asked ... How can I mend my binatone veva 1210 handset?    |    Click here to ask your question

Daughter's dirt devil smells like burning rubber?

My Daughter's dirt devil smells like burning rubber. I think it is the belt - but can't figure out how to get access to it. this is an upright Dirt Devil by royal vac. 6.5 amp. RED!

thanks
colleen, February 2008
I just bought mine couple of months ago and I have already changed the belt twice.. Just wondering if y'all have the same problem.. Thanks.

-Nima

Nima, July 2008
Ahh, the Dirt Devil Vision Turbo. Works good, smells bad. If your Dirt Devil smells like smoke, its probably a siezed belt. Flip the unit over and remove the 5 phillips screws holding the nozzle guard plate on. (Its black and flat.) Pop it off and pull out the roller with great gusto and joy. Notice the black shavings in the belt line area? Bad belt. You might find the stinky belt has melted to the roller. Just pry it off angrilly. Pull the other end of the belt off the vacuum motor roller (its silver). The installation of a new belt is the reverse of removal, and a new belt should cost you under 8 bucks. Put it all back together and get back to work you lazy, lazy person. These instructions are for model 088400 Vision Turbo Upright, other models are similar.

Rick G, April 2008
You can get the manual online at te dirtdevil website. There it explains and shows (with diagrams) where the belt is. You can also order new ones.

Katie, April 2008
link Click here to see other fixes for Dirt Devil Upright.