Sandy asked ... Replace vertical gear on Singer Fashion Mate 252?    |    Blaablaa asked ... How can I fix?    |    pete asked ... Flymo 330 turboglide?    |    keith asked ... Fuseboard( s) location of renault trafic t1100 1993?    |    Janet asked ... Neff B1641 door not closing at top?    |    Click here to ask your question

CR01 not emptying?

My dyson CR01 washing machine will not pump out the water.
the coin trap is clear and I drained out the macinne by lyting down the drain hose ito a bowl and loads a water came out.
The pump sounds like it's trying to run you can hear the mains hum, but i suspect the pump is faulty?

How do i remove the front cover so i can get to the pump?
Andy, March 2008
switch machine off at mains power.tip the machine back you will find the pump in side behind where your filter is , remove foreign object or if nothing is found replace drain pump.

www.asuds-appliance-spares.com, March 2008
Youd have more chance if you remove the rear cover.
Check out my site for info: www.2ndwave.co.uk/manual.html

washerman, March 2008
link Click here to see other fixes for Dyson CR01.