Blaablaa asked ... How can I fix?    |    pete asked ... Flymo 330 turboglide?    |    keith asked ... Fuseboard( s) location of renault trafic t1100 1993?    |    Janet asked ... Neff B1641 door not closing at top?    |    Steve asked ... Gilera runner 180 vxr 2001 ignition replacement?    |    Click here to ask your question

Engine starts fine,run great, but dies when clutch is released?

14hp Snapper 38" riding mower.,, Dog ate some wiring ( right side)but couldn't find any broken wires. Ground wire to starter pulled out but I fixed that. Where can I get a wiring diagram or advice???

P.S. dog still alive...
Michael Baudry, July 2004
Engine has no power. Could be poor compression, could be the diaphram on the carb

James, October 2005
Michael;
Thats good news to hear thet the dog made it. Now there is a safety switch on the clutch peddle that when you let the peddle out it will complete a circuit that will keep the mower running. They are on the right side of most mowers. Some where you will see eighter a plug unpluged or a switch disconected that will come from your clutch peddle. You will have to look careful but it's there trust me. Good luck with it!

Lester, July 2004
link Click here to see other fixes for Snapper.