HOOVER CONDENSER 6KG HDC6 UK

The on off switch on my drier will not latch into the on position, and therefore will not stay switched on to enable the load to be dried, has anybody else experienced this problem.

graemegreen_1@btinternet.com, April 2008

Hello Mate
You need a new relay pcb which fits behind the bezel at front with 2 phillips screws. Only 4 wires to attach. Dead simple. This is the part number you need 91201247
Can get them directly from hoover candy spares dept on their website. Only a few quid and you'll save yourself nearly 100 quid call out. Start by taking the 3 screws out of the lid of machine at back. Slide lid off, and you will see the match box sized relay pcb board just behind front bezel.
Hope this helps

Derek Hatfield, May 2008