David Dawes asked ... How to recoil the starter spring - Champion R484TR?    |    peter high asked ... How can I set time on my Neff oven?    |    Michael asked ... Mountfield empress drive belt?    |    John Barton asked ... How do i clear the TAM?    |    John asked ... How can I mend my binatone veva 1210 handset?    |    Click here to ask your question

Lawn mower not starting after oil flood on turning it upside ,accidentally?

I have a Qualcast suffolk turbo 40s model fitted with a Briggs stratton Engine
Model Details: Quantum Power 3.5 HP
Model 121782
Type0123 02
Code 9003205
I turned it upside down to clean it resulting in oil overflow. I have replaced witha new spark plug.I wonder if it needs filter cleaning.Don't know how to access the filter ? No instruction manual. Can you help ? Please tell me step wise as to how to remove and clean the filter anf if that is not enough, what else do I need to do ?
George Kuruvilla, May 2008
filter unlikley to be the cause could try adding a tiny amount of fuel, and i mean tiny, direct into spark plug hole and refitting also make sure fuel is new not old

Brian M, October 2012
On the B&S Quantum, the air filter is under the cover secured by a screw just underneath where the throttle cable attaches. The filter cannot be cleaned - if seriously comtaminated it must be replaced. Leave it off for testing.

Remove spark plug and crank engine rapidly to expel any oil from the cylinder.

Replace plug and attempt to start. It will probably smoke HEAVILY for a few minutes, as the muffler will be full of oil.

REPLACE AIR FILTER before using mower.

phil_saunders@bigfoot.com

Phil Saunders, May 2008
link Click here to see other fixes for Qualcast.