on the injection pump is a metal cylinder approx 40mm by60mm with 1 wire attatched this is the fuel cuttoff solonoid,make sure this has 12 volts when dash lights are on,if not run a temp wire from bat+ to solonoid terminal and try start.if no result,remove wire and unscrew solonoid carefully as there is a spring and plunger inside.remove spring and plunger and refit solonoid and try start.if it runs u will have to stall it to stop it.to test solonoid remove and replace spring and plunger ,on the bench connect battery - to solonoid body and battery+ to small terminal,should go click and rtrtact spring and plunger.if it does'nt then its bitched.renew.If none of the above starts then u have a fuel feed problem.All this is caused by a lack of fuel filter changes so make sure u renew the filter.any probs,repost.
caine, August 2008
