Don asked ... Find the charger or how to convert the battery?    |    Tanzania asked ... How can i mend my sanyo fwbp505f q?    |    Mark Goodwin asked ... Mount field 725m ride on mower?    |    Joan Sorrentino asked ... Barcalounger issue?    |    David asked ... Not starting until I bang door closed?    |    Click here to ask your question

How can I fix my Thomson Scenium TV?

I have a Sky Box. When I switch the TV on the red light flickers but does not turn green. Sometimes a blue screen comes up and sometimes no picture at all.

I have tried switching off at the plug and re booting the Sky Box.
Victor Thompson, November 2008
Just to say I now have exactly the same problem whenever the power has been switched off to the sky box. The only thing is that if I leave it long enough (5 to 15 minutes is usual) it stops flickering and can be turned on to green light.
Sometimes this produces a "no satilite siginal" notice and checking the signal test shows no signal on the lower input. Again after just leaving it like this for 15minutes+ it eventually comes on again and works normally. You can then swith back and forth to standby without further problems.

I suspected the LNB (because of one input dropping out) and replaced it but although it seemed to have helped at first I dont think it has made much differance.


I hope theres someone who can solve this

bill, December 2008
link Click here to see other fixes for Thomson.