I have no heat coming through on my creda T620CW condensor dryer. I have changed all of the thermostats, inspected the wiring and elements with no obvious faults found.

Jon Coles, August 2004

Hi
the problem you are both having is the float switch in the bottom of the cabinet this has got stuck or you have water spilt into the bottom try tilting it back with the water tank out or giving it a gentle bang underneath to reset the float switch.

domestic machines on ebay.co.uk, December 2005

No answer I'm afraid but this happened to us about 4 months ago. We called out an independent repairer who took off the back panel, could find no fault, was a good guy so wasn't going to charge us anything. He suggested that we needed to call out a Creda engineer because it was the programmer? possibly but then as he put it together it started heating again. He was baffled. It has just gone again this morning hence me looking at this site for an answer. Perhaps they just need a rest now and again. If it hasn't righted itself in 24 hours we'll call him out again and I'll feedback.

Gavin, August 2004