Hi All,

I'm hoping someone can identify the problem with the Gainsborough Energy 2000x shower (don't know if it's the 9.5 or 10.8 version), which has worked fine without incident for the last 7 years.

Basically I can't get anything hotter than warm water from the shower now, and that's only intermittantly on the "high" setting with the dial at around 6 o'clock. The majority of the time the water is tepid, which is obviously not much use.

I haven't noticed any other changes when the power comes on, the same LED's light up, though there is a slight vibrating sound every now and then, but to be honest that could have been happening before.

I took the front panel off the shower console and was confronted with lots of electrical wires and parts I though it best not to touch, for now.

TIA

brduk, January 2009