Hi, The machine is fine until it gets to the spin cycle, the drum starts but then it shuts down, this happens on all speeds, Once the damn thing nearly tipped up on the 1400 spin setting, any ideas.....

Geoff Gardner, May 2009

Thanks Paul, will give that a go.........

G Gardner, May 2009

I had the same problem.
You will probably find that the speed sensor has come loose.

On the back of the motor spindle, remove the cap, and you may find that the spin sensor has unscrewed from the shaft. Add a drop of thread lock to the thread and screw home fully. re assemble the sensor housing. Done.

Regards

Paul, May 2009