how can i get my peugeot speed fight 2 100 to start as it wont fire?

i have got a peugeot speed fight 2 100cc i think i have put to much petrol in it because were the spark plug is the petrol is fludding i have dryed it out and there is no petrol in the spark plug unit, i replaced the spark plug with a new one and it still wont fire. can you please tell me what the problem is?
thank you
darran
darran wright, January 2006


done
join us at www.Pug-Club.co.uk for this typ of help

www.Pug-Club.co.uk, February 2010
try this if you have a spark Warm up the sparky plug ... Replace it while still hot ...then try to start the engine again ..

ja, February 2010
do you get a spark ?

ja, February 2010
same thing happed to me, wen u try starting it, does it sound cranky? if so its ur pistons! trust me. if u drive in the red zone 4 to long, ur pistons become weaker.!!!
so ya try replacing ur piston.

john, March 2009
darran your fuel tap should not allow fuel to get through until the bike is running so this must be faulty also the carburettor is not stopping the fuel getting to high in the float bowl ,either the float has a hole in it or the needle seat or needle is damaged where it seats to close the flow of fuel off ok somits your carb or your fuel tap but really the carb should still stop the fuel even if the fuel tap is faulty sounds confusing but thats what the problem is ,adam

adam, January 2006
link Click here to see other fixes for Peugeot.