My washer a whirlpool lsr7233eqo fills properly for the wash cycle but when it gets to the rinse cycle the water drips into the tub what parts do you think I need.
If the previous answer does not work, disconnect hoses and check water pressure, to ensure that you have a good water supply, if good replace you fill valve located on the rear panel. good, luck.
Kevin, February 2006
Hello,
Your probably washing in hot/warm and rinsing in cold so turn off the cold water supply. After you do that, unscrew the end of the hose connected to the cold side of the water valve and clean out the filter scren that's clogged up with sediment. Hope this helps.
