Toddy asked ... Pdw5048tms saw?    |    Karen asked ... Royal 480nt cash register?    |    andrew smith asked ... 2009 fiesta 1388 cc titainum?    |    Eric asked ... Strimmer fuel line?    |    Frank asked ... Working fine. No cold air?    |    Click here to ask your question

how to take apart hotpoint dryer?

how to take apart hotpoint dryer to replace heater
Anne, March 2006
on the back off your dryer are 2 small covers take the 1st one off then the large one after you will then see the heater elliments undo your power 1st from the mains then take the orange wire off and the brown wire. what i had to do was cut the blue wire . then look at the heater elliments undo the plate on the top left holding the wires and take the plate off by lifting it up gently then use 2 hand and hold the bottom of the metal sides off the elliments and pull the bottoms out gently and then push up as the sides are on a clip push up and it will come off..when you get a ner on the wires will be different you will have to put 2 new spade conectors on the blue and brown wires good luck

andy, March 2006
link Click here to see other fixes for Hotpoint.