John Barton asked ... How do i clear the TAM?    |    John asked ... How can I mend my binatone veva 1210 handset?    |    Kurt asked ... How can i mend my Aiwa HV-FX7700K?    |    Laetitia asked ... Toyota overlocker model 3400 D?    |    Jo-Anne O'Mullane asked ... Clear E1 error code on smeg dishwasher with no water or leak?    |    Click here to ask your question

mira sport 10.8kw fault?

There is little pressure. On full power it is cold for a good half a minute or so and then works the same as on medium but low pressure. Seems as though max power is not working.
Has worked fine for 3 years or so.
Any ideas please
Rick, December 2009
Likely to be a fault with heating element.
Power off the appliance at the main switch.
The elements can then be checked with a mulitmeter.
Typical resistance reading should be about 14 ohms for each element section.
If in doubt call an electrician to assist.

garryk, December 2009
link Click here to see other fixes for Mira.