Carol asked ... How to remove roller from lawnmower?    |    Ariana Orellana asked ... Code?    |    Lynnie asked ... BT Studio 4500 cordless telephone?    |    David Dawes asked ... How to recoil the starter spring - Champion R484TR?    |    peter high asked ... How can I set time on my Neff oven?    |    Click here to ask your question

screen wash stopped pumping after filling up?

my screen wash was working fine but running low, so naturally i filled it up and now it won't spray at all! I can't see any obvious kinks or breaks in the cable but even that wouldn't explain how simply taking off the lid of the screen wash container and filling up would stop it working at all! car is Audi 80 sport H reg
davejp, January 2010
Does washing the water reserve with a garden hose not damage the engine, with all the excess water?

footy147, January 2010
Old screenwash can form like a gel which blocks the pipes and jets. I use a strong water jet (garden hose) to wash out the washer reservoir when this happens. When cleaned out, refill with fresh washer fluid and you should be OK again.

ChicksFan, January 2010
There is a little filter on the bottom of the washer pump and it is most likely blocked by all the manky screenwash left in the bottom of the bottle. Should be easy to remove the pump and then the filter can be wiped clean.

boiler bill, January 2010
link Click here to see other fixes for Audi.