Bissell ProHeat 2x 8930 won't floor spray

Kim LeGrand, January 2010

I found an amazing website for troubleshooting this. It is http://newzealand.bissell.com/images/IncludeContent/Service_Center_Help/Troubleshooting_ProHeat2X_9400F.pdf

Dank, February 2012

Unclip the red spray nozzels and run .45 silver beading wire through the holes to clear blockage. I did this and my floor sprayer still doesn't work, but I'm sure the sprayers aren't blocked so maybe this will help someone trouble shoot blockage. I'm beginning to suspect the spray trigger mechanism. I took it apart but can't tell much, any suggestions on trouble shooting it?

Tori, April 2011

The soap in the spray pipework has formed little crystals which block the jets and pump - you'll have to force / suck warm water through the soap pipes with the nozzles removed to clear it. Never leave soap in the system when the cleaner is stored in a warm building - ignore the hand book which says leave the soap on ready for use, it just causes problems - flush well after use.

GLB, February 2010

Have you got any other suggestions regareding warrinty from nov 08 how long the warrenty lasts for

scotty, February 2010

Remove the water tank
Unclip the 2 red spray nozzles and clean them w/ a toothbrush

Kim LeGrand, January 2010