The drum of my Ultima WD860 starts filling up with water after a washing cycle.
The washing cycle itself runs normally and the clothes come out having been spun and not soaking wet. It is a couple of hours later that you then notice the drum has been slowly filling up.
Can anyone help?

Fiona, March 2010

there are 2 possibles
1) drainage hose is connected to the sink u bend, sink water running back into machine,
( cure ) raise the height of the pipe between the washer and the u bend to just under the work top if possible.
2) the cold fill inlet valve is letting past could be grit on the seating or a split/perished washer change the inlet solenoid valve in the machine

wirecutterman, March 2010