I have and indesit WE 16, showing error code -H20 after the cycle is complete, machine stayed full of water, but i was able drain & spin seperatly. Any ideas??

Louise Attewell, May 2006

I had the same also had the machine filling with water and a leak on the right hand side. Took off the top and found it coming from the thin pressre hose. Removed the hose (awkward) and when I checked it found that it had rubbed almost flat on the drum. I am about to get a replacement

Al Cockayne, November 2006

Error code -H20, no water present or detected. This could be due to a fault on the main circuit board.

Mr.T.Yaqub, September 2006