Don asked ... Find the charger or how to convert the battery?    |    Tanzania asked ... How can i mend my sanyo fwbp505f q?    |    Mark Goodwin asked ... Mount field 725m ride on mower?    |    Joan Sorrentino asked ... Barcalounger issue?    |    David asked ... Not starting until I bang door closed?    |    Click here to ask your question

Craftsman Gasoline Weedwacker Model no. 358.791070?

Pull rope that starts engine will not go back in all the way. It is getting so bad it will not go in much at all.I now have to pull rope with both hands to get it to start. Crartsman Gasoline weedwacker Model no. 358.791070
Paul, April 2010
There is a seemingly insignificant ridge around the rope reel which wears down and doesn't keep the recoil spring in place, resulting in the spring coming out of its position. The part is from Sears Parts Direct # 545050408.

Gateway, June 2011
You need to either re tention the return spring or replace it, if you take the starter off always be aware there will be a large recoil spring under the pulley, always wear eye protection when working on starters, to re tention the spring insert the cord into the cut a way in the pulley, now wind the pulley up against spring tention, do not over wind the spring as this will coil bind it and pull the ends out, tention just enough to retract the cord fully.

Husqvarna man, April 2010
link Click here to see other fixes for Craftsman.