hi loosen large nut on end of cv joint then jack car up remove road wheel undo bottom ball(try use grease when splitting joint as rubber on ball joint will split) joint and track rod end remove large nut from cv joint an then using ball joint spiltter remove bottom ball joint pull drive shaft clear tap off cv joint remove old boot then reasemble in same way as you removed. or i think you can buy a cv boot that is split an you just cut old one off put other over drive shaft an glue then use zip ties i would say this method is not the best but the first one is a challenge for some one who needs to ask but we all need to learn good look
aldo, June 2010
