have repeated tried to level deck, had to replay the star shaft on left side, now it seems to cut much lower on that side... any suggestions that possibly cud help???? I have tightened up the adjusting bolt on that side , maybe not enuff,,, but just seems not to work at all, still scalps on left side... left side is me sitting in driver seat....

obx dude, June 2010

You need to get the machine on a flat surface, get the blades pointing toward front and back, measure the distance from the floor to the tip of the blades at the from and at the rear, the rear should be approx 1/2" higher than the front but should be the same from left to right, adjust the deck rods to get this, once level from left to right it has to cut level, should have said check all tyre pressures before measuring. It will make things easier if you make some small blocks as your measure

Husqvarna man, June 2010