light comes on & engine cuts,restarts after a while, handbook says its a fault with the emissions system, i no roughly how this system works but what do i do with it, is there a filter,or is something blocked or choked,or EGR valve need cleaning or renewing

Jeff Broom, July 2010

2012 boxer 2.2 Mel on been to dealer they have changed the capture sensor light came back on after two miles. They have now contacted Peugot for advice?

Ted Lawton, April 2016

My peugeot boxer 2.8hdi it keep went off after 30sec.

meyson, January 2014

We had this on a 2002 2.8 diesel motor home.

Check the connections on the throttle loom. Its fly by wire and when they convert to RHD they add a plug in wiring extension - its a 4 cable brown plug under the passenger dash by nearside wheelarch - the plug or wires to it can get a bit corroded and gives an intermittent fault - in our case when we went downhill over a bump in the road !!!!

'Repairs' cost me £300 at the main dealer ( waste of time ) and was finally located by a back street garage. Total time to fix about 10 minutes. ... and prior to that 6 months trying to get sense out of Peugeot and various dealers who washed their hands of the problem.

Ross, December 2011

i think theres a sensor on the front pipe.could have gone down.but like wickham says its best to get it on a diagnostics machine.you could spend a fortune swapping sensors all over the place and still not fix it.could even be dirt in a injector.hope been of some help.cheers

paul h, July 2010

wouldn`t do any harm to clean the EGR valve and maybe get a code reader onto it for a look at faults stored

wickham, July 2010