41 mins ago Dave asked ... Toilet Push Button not flushing properly?    |    Dave asked ... Repair kettle lid?    |    Sandy asked ... Replace vertical gear on Singer Fashion Mate 252?    |    Blaablaa asked ... How can I fix?    |    pete asked ... Flymo 330 turboglide?    |    Click here to ask your question

How can i fix my, iveco daily 05 plate van ?

My Iveco Daily, 35-10 mwb van failed MOT with "rear suspension has inadequate clearance with bump stops", near side about 5mm clearance, off side on the stop (my measurements) stood on level ground.
Any ideas would be helpful please.
John Cavill, July 2010
spring/shackle bushes tend to wear out on these, but agai n tester should have recorded this!

k, July 2010
Thanks on that, will see what there is.

John Cavill, July 2010
Think the only answer John would be to fit new springs,dont know if you can get uprated springs for these,try a motor factors,worth a go may save you a few quid.

wickham, July 2010
Thanks, Its an 05 as stated and yes it does carry heavy loads

John Cavill, July 2010
you may have weak or broken leaf springs,tester would probably have spotted broken springs,depends how old your veh.is and does it carry heavy loads

wickham, July 2010
link Click here to see other fixes for Iveco Daily.