hi all my R1 is a 99 V reg my dipped beam stopped working checked fuses all ok full beam works changed both headlight bulbs for new 1s and no light sprayed WD40 in switch etc etc its only done 16000 mls and well looked after local bike shop wants to charge me £40 an hour to diagnose it says could take a few hours ;( can any 1 help me please much appreciative

Richy, August 2010

cheers m8 got power to full beam not dipped and switch sendin to dipped not receiving at bulb dont know where relay is to check

Richy, September 2010

well the ignition has a live feed that goes through a fuse and then goes into the right hand switch gear then it goes to the left hand swithc gear and gets either fed to the low or high beam wire dending on the switches position then it gets fed to a relay that it switched either way and then it goes to the headlight bulbs.you need to establish with a power probe or meter if the power from/to the on/off switch is there and if its getting to and from the hi/lo switch to the relay and then if its getting from the relay to the bulbs.if your anywhere near milton keynes id have a look for you.

adam bike doctor, September 2010