One of the drive belts in my Gardenline GVM-600 lawn rake has snapped. I have purchased the 120XL-031 drive belts to replace the broken one but I am having problems in removing the outer belt. The nylon sprokets seems to be fixed in place and I cannot see how they can be loosen/removed to allow the belts to be fitted. Any help/advice from GVM-600 owner would be greatly appreciated.

Sharky, September 2010

For full help tel Solent Tools on 023 80578057. Basically though you need to remove the belt that drives the tine assembly and then fit the motor drive belt first. This will go on the middle pulley but on the larger pulley. You can then refit the tine driving belt to the small front pulley. If you need tines they also stock those at Solent Tools www.solenttools.co.uk

martin, January 2011