Turbo or non makes no difference!
New bolts MUST be used
1) tighten to 30Nm
2) tighten +100 +/-4 deg
3) wait 3 mins
4) bolts 1&2 slacken off then 25Nm then +213 +/-7deg
5) """"" 3&4 """"""""""""""""""""""""""""""""""""
6) """"" 5&6 """"""""""""""""""""""""""""""""""""
7) """"" 7&8 """"""""""""""""""""""""""""""""""""
8) """"" 9&10 """"""""""""""""""""""""""""""""""""
Bolt sequence
8, 4, 1, 5, 9,
xxxxxxxxx Flywheel
7, 3, 2, 6, 10,
front of engine
nigel, September 2010
