4 hours ago Sandy asked ... Replace vertical gear on Singer Fashion Mate 252?    |    Blaablaa asked ... How can I fix?    |    pete asked ... Flymo 330 turboglide?    |    keith asked ... Fuseboard( s) location of renault trafic t1100 1993?    |    Janet asked ... Neff B1641 door not closing at top?    |    Click here to ask your question

How do I fix AIWA TV-1042: Picture compressed to a horizontal stripe?

Usually when Tv is turned on only a single horizontal stripe appears in the middle of the screen (full length) as if the picture were compressed to about quarter of an inch height. After 10-30 minutes the fault goes away and normal picture appears. Any ideas what the cause is and how to fix it, if it is worthwhile?
Jacob, July 2006
It's a very common TV fault symptom (field/frame collapse).
Often due to leaky electrolytic capacitors or dry joints in the frame output circuit. Usually cheap to fix and worth repairing.
Don't run the TV while it displays a bright horizontal line as it can burn the screen phosphor and leave a permanent image.

Cobweb, July 2006
link Click here to see other fixes for Aiwa.