Blaablaa asked ... How can I fix?    |    pete asked ... Flymo 330 turboglide?    |    keith asked ... Fuseboard( s) location of renault trafic t1100 1993?    |    Janet asked ... Neff B1641 door not closing at top?    |    Steve asked ... Gilera runner 180 vxr 2001 ignition replacement?    |    Click here to ask your question

The Program timer keeps clicking round and round?

Ariston Margherita 2000 -when set to a Spin cycle the cycle works perfectly. When set to a wash cycle the machine fills with water and collects the detergent correctly, then it goes to a drain cycle and the program dial starts turning round . The red program light flashes as though the program is completed.
There are no blockages, you can blow though the waste pipe up to the drum. Besides during the cycles the drain step is performed correcly (if too early on the wash)
Gary Cummings, July 2006
Hi I just had the same prob, got that part and fitted it - to get the old part off, remove the front part of the dial (the know you see and use/turn) - u can just pull it off - hard. Then unscrew the screw u see, then lift and pull out the old timer and fit the new one..
unfortunately this did not fix the problem for me! Any ideas anyone?

kleinbaas, September 2008
Hi just got the same problem. Sounds like the mechanical timer. Prt No: 064555 ELBI 16651 about £20 off the net. Trouble is fitting the thing looked easy but have to take out the top front panel I think. Just can't get it out..Any ideas anyone..

fireblade, July 2008
link Click here to see other fixes for Ariston Margherita 2000.