My Bosch Maxx 6 is totally dead apart from flashing rinse LED, from searching elsewhere assume is a motor circuit fault, on inspection inside covered in fine cardon dust, can I assume the brushes are at fault.? Or will it be the PCB.

Kenny, February 2011

I tried _ plug out for 5min. plug back, turn knob to 15th position - hold start and rinse button in it still flickering on 800-600-400 and no red light on start- what can I do

trudie, March 2014

Just a little advise. After fitting new brushes the rinse light was still flashing. No amount of pressing start or position 15 helped. I then decided in frustration to press all three buttons in together. So I pressed rinse plus, start and express wash all at the same time and hey presto it works! One happy bunny and thanks to espares for their excellent service. Www.espares.co.uk

Captain Insano, February 2014

As an update inspected the motor brushes they are needing changed, in meantime I cleaned the motor and the existing brushes and re-installed them. I reset the machine by pressing start at position 15 then to off (think thats it). Working again, brushes on order.

Kenny, February 2011