i have a 51 plate rwd transit which makes a grinding noise when i turn right, wheel bearing needs replaced apparantly! can someone tell me how to do it plz! cheers

Graham, April 2011

remove caliper,tie up to spring to support hose,remove 5 torx 50 bolts through hub holes,remove 36mm hub nut,get block of wood and large hammer and hammer off disc and hub as a unit,the hub may be tight in the carrier,when off remove 5 13mm bolts holding disc on,you will need a good press to remove/fit bearing and rebuild in reverse

cdc, April 2011

Hi, the awswer just maybe at this link..

http://fordtransit.org/forum/viewtopic.php?f=4&p=273735

ken, April 2011