Blaablaa asked ... How can I fix?    |    pete asked ... Flymo 330 turboglide?    |    keith asked ... Fuseboard( s) location of renault trafic t1100 1993?    |    Janet asked ... Neff B1641 door not closing at top?    |    Steve asked ... Gilera runner 180 vxr 2001 ignition replacement?    |    Click here to ask your question

replacment carb?

hi have an old mountfield m6 mower with a tecumseh bvl198 engine the carb is nacked (siezed choke lever) it is still a good mower and still runs..just..any one know were i can get a new carb to fit
rusty weasle, August 2011
good luck with finding one they went bust some time ago

daz, August 2011
Remove the carb as a unit and take it to any reputable garden machinery repairer. They will have a device called an ultrasonic cleaning bath, which will deep clean the carb and get into the bits you can't with wd40 and such like. Shouldn't cost you more than £15-£20.

pleasant, August 2011
If I knew I wouldn't tell you they are like rocking horse """"
so you have got the carb off,clean well and use plenty of WD40 spray liberally until free, should work OK.

cg, August 2011
link Click here to see other fixes for Mountfield.