is changing the brake pads on a nissan primera 2005 straight forward

TONY HUNT, September 2011

you will need a brake caliper wind back tool for the rear

cdc, September 2011

The rear brake pistons don't normally just "push in" they have to be rotated either clockwise or anticlock and to do this without damaging the piston a piston retract tool is the best method, as it will apply pressure and allow it to rotate at the same time

nigel, September 2011

They are all straight forward, As long as you have some tools, socket set, or spanners, socket set prefered, take wheel off, use some thing to move calipers apart, I use a G clamp, But a screwdriver used correctly, will not damage anything, to prise the calipers open, unbolt calipers, pull out old pads, push in new, refit, job done

SD, September 2011