57 mins ago Frank asked ... Working fine. No cold air?    |    4 hours ago c.m.brown asked ... Replace chuck on aeg power drill sb2e 700r?    |    tom dimmock asked ... How can i mend the lid on russell hobbs elec?    |    Jerry asked ... Alpine 7287?    |    Guy asked ... Gaggenau fridge alarm problem?    |    Click here to ask your question

How can I fix my Hotpoint TCM570 Aquarius condensor dryer?

The "empty water" light comes on, despite it being empty, & each time I try to operate it, it trips out the fuse.
Graeme, September 2011
my dryer the water light comes on after about 20 mins it drys the clothes but I might need to put it on 2,or 3 times, what could be wrong wit it

michelle, February 2014
at back of machine at bottom you will see a gray chamber,this houses the float switch,what happens is fluff sticks the foam float to bottom of the chamber,this causes water to gather in the heater matrix,(top left of machine)the cover looks like a comma,unplug machine before you do anything
remove all the screws around the heater matrix,this will drain any water that is there,clean the fluff out of the float chamber,if your in luck thats all you need to do,but if ur luck out,u may need change heater assm

mm, September 2011
link Click here to see other fixes for Hotpoint TCM570.