Ariana Orellana asked ... Code?    |    Lynnie asked ... BT Studio 4500 cordless telephone?    |    David Dawes asked ... How to recoil the starter spring - Champion R484TR?    |    peter high asked ... How can I set time on my Neff oven?    |    Michael asked ... Mountfield empress drive belt?    |    Click here to ask your question

how do I replace the tines on my power devil hblr1 scarifier?

The drum is in sections how do I split them to replace tines?
Mr Graham Stacey, June 2012
I have a cheapo electric Power Devil, but it seems to have the same scarifier drum. Anyway, thanks to Mr Coker's advice I could pull back the sprung washer far enough without breaking it, so that I could slide the sections out to replace the broken spring tines. Now I'm just hoping that the replacement tines I ordered off ebay will fit... Spartacus 60 x Lawn Raker Tines Power Devil PDGELR400. If they don't I'll pop back in.

Martin Hadfield, June 2023
Agreed did as below :

On one end there is a sprung washer (it probably has a more technical name) which slides one way only to secure the sections in place. Once removed the sections came away easily.

Replaced all tines and resecured :)

Have to test when dry ...so all good so far ...

Did the job, April 2014
On one end there is a sprung washer (it probably has a more technical name) which slides one way only to secure the sections in place. I had to break mine to remove it, but once removed the sections came away easily. Now to see if I can find a replacement washer.

Graham Coker, April 2014
link Click here to see other fixes for Power Devil.