Sandy asked ... Replace vertical gear on Singer Fashion Mate 252?    |    Blaablaa asked ... How can I fix?    |    pete asked ... Flymo 330 turboglide?    |    keith asked ... Fuseboard( s) location of renault trafic t1100 1993?    |    Janet asked ... Neff B1641 door not closing at top?    |    Click here to ask your question

My fisher and paykel gw611 wont start up at all?

it shows no lights or anything anyone help?
its not the point because other things work
michael, November 2012
I am talking about warranty on the new parts. If the new board plays up or fails when installed then F&P will give you a replacement if fitted by an experienced technician. If you fit it yourself and something happens then F&P will say tough. You just lost a load of money cause we won't accept liability.

Lincoln Appliance NZ, December 2012
Hi Its michael Here there is no warranty as far as i know

michael, November 2012
Either the drain pump or the main control board has died on it. The drain pump will stop it ftom powering up if completely dead but it is more likely to be the main control board. Get someone out to test the parts and fix it. That way you will only pay for the one part that is needed and more importantly you will be covered by warranty if something goes wrong. If you fit the part yourself and damage the new control board then F&P will not replace it. They will if fitted by a trained tech.

Lincoln Appliance NZ, November 2012