Don asked ... Find the charger or how to convert the battery?    |    Tanzania asked ... How can i mend my sanyo fwbp505f q?    |    Mark Goodwin asked ... Mount field 725m ride on mower?    |    Joan Sorrentino asked ... Barcalounger issue?    |    David asked ... Not starting until I bang door closed?    |    Click here to ask your question

Wiring instructions for re-fitting a heating element for Creda T622cw Dryer?

Could you give me wiring instructions for fitting a new heating element to a Creda T622CW Condenser Dryer
brian atkins, November 2006
This suggestion for the wiring doesn't fit. Cables won't physically do it. I believe the blue goes on the right and orange on the left since the blue cables are longer.

However I did wonder if they were mixed with the longer cables on the right and shorter on the left??

Paul Winstone, October 2007
There should be an orange and blue wire coming from inside the dryer, these two wires should connect to the right hand lugs of the thermostats (orange to the right hand thermo stat.)
The orange wire from the heater elementgoes to the left lug of the rightmost thermostat and the blue/brown to the left of the other one. The two blue wires from the element go into the machine and connect up with the T-block on the other side of the access hole above the fan. If you require photos, email me on dave(at)saddlerscottage.net replacing the (at) with the symbol- stops spam.

Dave

Dave, January 2007
link Click here to see other fixes for Creda T622CW.