I have a piaggio skipper 125, the guy i aquired it from, has lost the fob for the immobilser!! its a round shaped fob size of a penny. I think before you turn the key your supposed to make contact with this to its oposite other on the scoot!! I have the flashing led..and i have the master key, once i turn that the beep is their for so many seconds. I press start sweet F/A. Can i get around this without replacing ecu...any advice other than scrap it....much appreciate

ady, February 2013

its a piece of pi** to get rid of these, is it a datatool one, it should really be the standard one as they were originally sold as an accessory, by piaggio, however as bob says i cant tell you how to do it, but take it to your nearest dealer they can get rid of easily

m, March 2013

you are a clown expecting someone to explain how to by-pass a security device.
Also buying a possible stolen vehicle or one the seller had no right to sell hence no fob.
If stolen and police recover you have no way of refund the same goes if it turns out to be on HP. I would like to know how far to home you had to push it.

bob, February 2013