Blaablaa asked ... How can I fix?    |    pete asked ... Flymo 330 turboglide?    |    keith asked ... Fuseboard( s) location of renault trafic t1100 1993?    |    Janet asked ... Neff B1641 door not closing at top?    |    Steve asked ... Gilera runner 180 vxr 2001 ignition replacement?    |    Click here to ask your question

home Fix label Vehicles label_important Tractors category JCB

1987 JCB Syncro Shuttle trans Low Oil Pressure Light Stays On?

Cleaned screen; new filter and new fluids. Still the light will not go out. Removed pressure switch an checked continuity; seems "OK". Tractor works well in forward and reverse.
Don, September 2014
home Fix label Vehicles label_important Tractors category JCBdone
1)The pressure switch is an earth switch, the harness may be rubbed through does the light go out when the pressure switch is unplugged.
2) Transmission mainline pressure should be at least 90 PSI idle - 150 PSI max rpm when measured at test point above filter.

fixajcb, September 2014
link Click here to see other fixes for JCB.

Fix Fault - Vehicles

home label Vehicles label_important Tractors

oil consumption?

Vehicles > Tractors

New Holland Powerstar 4.75?

Vehicles > Tractors > New Holland

Jcb 525sforward and reverse gear when started blows fuse?

Vehicles > Tractors > JCB

Jcb transmission problem?

Vehicles > Tractors > JCB

Same siliver 130 under power?

Vehicles > Tractors

what is error code e39 mean and how do i fix it?

Vehicles > Tractors

Tractor New Holland 8340?

Vehicles > Tractors > New Holland

F44 error code on NH 8560?

Vehicles > Tractors > New Holland

Fix Fault - Vehicles

home label Vehicles label_important Tractors

fixfault.com

fixfault.com for free repair help, information and advice.

How can I fix my JCB 3CX?
How can I fix my JCB 526?
How can I fix my Fordson Major?
How can I fix my Ford 8340?
How can I fix my JCB 1CX?