My white knight 767c tumble dryer will run as long as someone is pushing on the button but as soon as you take your finger off it, it stops.
It first did this a couple of months ago but I was able to get it going sometimes by holding my finger on the start button and gently releasing it, however that isn't working this time.
Does anyone have any ideas what's going on here, and if so, is there anything I can do about it or is it just a "call a repair person" issue?
Thanks in advance for your help.

Tom, November 2016

there is a small pcb board on the side at the top of dryer this is what starts the dryer replace it job done

john, November 2016

It is kind of obvious that the start push button is faulty. Replace it with a new switch. If that is beyond your capabilities then call a service company.

George, November 2016

All you need to do is a Google search for - say - "white knight 767c spares"

You'd get results like this:

http://www.espares.co.uk/search/ma129pt1915/tumble-dryers/switches/white-knight-crosslee

Anon, November 2016